Turnbull Bay

As part of my Inshore Skippers course I went on an overnight sail to Turn

bull Bay, 32nm from Darwin. The next group of students were going on the 8th May and Jenny (runs the course and owns Zanibar the Farr 38 training yacht) suggested that anyone with a boat can tag along. Judith (co-student) and her hubby just bought a brand new Catalina 309 and asked if Sandy and I would like to join her on the Turnbull trip. Naturally we said yes. Funny thing was Judith's hubby was in France and Judith was not too familiar with her new boat, this sort of put me in charge a bit and it was a great learning experience.

Morning at Turnbull Bay looking at Zanibar.

We left the marina at 1900 (7pm to you landlubbers) and as there was no breeze we motored out toward Charles Point. At Charles Point we turn south toward Bynoe Harbour. When we were about 3 nm from Charles Point a bit of breeze picked up so We decided that we should be sailing and not listening to a diesel hum. So imagine this: New boat, to me and the owner, it has in-mast furling so the main sail just rolls out of the mast all very leisurely. This is when my nerves start unwinding, as the sail is almost out it jams and we can not get it out or roll it back in. This makes me a bit stressed as the next day is a forecast Coastal Wind Warning and I've got 9/10th of the mainsail up unable to reduce it!!!!. Anyway a bit of tacking to put wind pressure on the sail eventually freed it up and we unrolled all main and head sails and had a delightful sail down to Turnbull.

Judith cooking breakfast in the morning

The sail back in the morning was fabulous, a close reach in about 10 knots, if you know anything about sailing you know that that is a happy place in any boat but on a brand new $200K yacht it's not too shabby.

Sandy and I enjoying the conditions

Now I mentioned that there was a coastal wind warning due the next day so I knew what to expect when we hit Charles POint and came out of the lee of the land. Essentially the wind picked up to 20-25knots coming directly from Darwin (where we wanted to go). So the seas built and we had to bash our way on an offshore tack to get room to try and make Darwin on the next tack. Lots of fun and we reduced sail twice with spray coming over the whole boat as we pushed into the short but step swell.

Charles Point before the conditions got worse.

As we continued once we got on the close hauled point of sail, Zanibar, which is a race boat, took off and we couldnt keep up. We ended up rolling up the headsail completely and starting the motor so we could point a little higher as we all were very tired and didnt want to be getting back to Darwin in the dark.

A huge weekend and a great time was had by all!!!

Oh my Gawd, have you looked at the countdown

Sandy and I bobbing along doing what we do and having a great time suddenly realise that we have about two weeks until we are supposed to riding around the Atherton Tablelands!!!!

Quickly last weekend we load up the bikes with front and rear panniers filled with stuff to simulate a load and go for a 40km ride. The result was not too bad, could've kept going so we feel a bit better. Having said that there are no mountain ranges in Darwin :)

Gary's new dynamo hub

Now I cant have Sandy having a dynamo hub and me not :) So I ordered a groovy Schmidt hub and spokes and I built the wheel myself.

Gary's first Inshore Skippers practical session

I enrolled in the Inshore Skipper Certificate course. The course is a sailing based course accredited with Yachting Australia and run by the Winter School of Sailing here in Darwin. It's an intensive 10 week course with theory session one to three times per week and four practical session on John and Jenny's Farr 38.

Last Sunday we hit the harbour for our navigation practical and what a nice day it was. Overcast so not too hot but enough breeze to get some decent sailing in.

The aim of today was to plot a course to sail allowing for the tidal current. For those who dont know Darwin harbou

r we have BIG tides and of course Sunday was a spring tide so we had plenty of current to allow for. During my turn at plotting the chart tidal data said we would have 2.5 knots of tide pushing us out of the harbour and the wind was on the port quarter. Naturally as soon as I gave the helmsman/person the course

the wind change and we could hold my course so they then gave me what they could steer and I then determined where that would take us and a point at which we would need to gybe to get to our mark 10 nautical miles away. It wasnt long and the helmsman gave me more bad news on the course they could steer as the wind shifted.

Little did I know that they guys up on deck had a GPS had having quite a good chuckle at my use of the charted 2.5 knots of current that was actually 3.5knots. Sailing at 5-6knots that tidal stream made a huge difference.

Jenny had a big smile on her face as we each battled Darwin's big tide.

Fighting our way back to the pontoon was fun with the tide and the wind eased. We were making 1.5 knots over the ground while the log showed us sailing at 4.5 through the water.

The action at the chart table.

Click here to see these photos in full on Picasa

New Autopilot for the boat

The dry season is getting closer so Sandy and I are starting to get the boat ready for a new season of sailing. I went out and bought a new Autopilot (Raymarine ST1000+) so we dont have to hand steer all the time. For those that dont know, steering a boat is fun for about 10 minutes :)

Will be fitting it this weekend.

Sandy's new flat bar tourer

Sandy's Vivente has low handlebars, this combined with the not so efficient brakes made us think about converting her bike to flat bars and putting a set of v-brakes on the front.

Wow!!! What a difference. The bars are higher so she's more comfortable and the brakes are fantastic. We trialed it with the gear of my mountain bike but then bought her shiny new LX shifter and brakes levers and a set of v-brakes for the front. Fitted it all and she loves it.

Will post photos later.

Sandy's Beetles are finally finished

I guess it's technically not an adventure but Sandy put heaps of work into these little guys so I wanted to share them.

Sandy started work on these a couple of years ago.  It's 'stumpwork' which is like 3D embroidery.

(click the image to get the supersize version)